Alpha Miner Bitmain Antminer S19 PSU APW12

Alpha Miner PSUs for Bitmain Antminer S19 / T19

Alpha Miner developed products to replace original Bitmain Antminer S19 / T19 series miners APW121215 PSU. We offer an alternative to Bitmain APW12 in Air and Immersion (removed fans, better flow casing, silicon protected wires, cables, capacitors, etc.) versions. Our PSUs for S19 are compatible with the original Bitmain FW and with Vnish overclock firmwares to help our customers getting the fastest ROI possible out of their investment. Using our product on North American 480 VAC (277V single phaze) reduces deployment time, cuts cost and wait time on step-down transformers.

With any PSU we produce you can use a special Alpha Miner/Vnish FW for S19-series miners, enablying the most efficient, productive, and profitable mining. This FW is dowanloadable below or from our Firmware page

Alpha Miner PSU-4KBM19 supports 180 - 300 VAC input and has a peak 4200W (4000 operational), 12 - 15.5 VDC output (see the specs below).

Alpha Miner PSU-5KBM19 supports 180 - 300 VAC input and has a peak 5600W (5400W operational), 12 - 15.5 VDC outpu (see the specs below). Once the early production is over, it will come with Alpha Miner FW only.

 

Immersion specific 7200W version is available here.

Please, contact us at sales@alphaminer.io for more information.

Alpha Miner /Vnish Firmware for Antminer S19/T19    

Americas and Europe

Alpha Miner PSU-4KBM19 Specifications:    

Alpha Miner PSU-4KBM19 vs. Bitmain APW12 Specifications Comparison Table

Alpha Miner PSU-5KBM19 Specifications:    

Alpha Miner PSU-4KBM19 vs. PSU-5KBM19 vs.  Bitmain APW12 vs.  Fake  "Bitmain"  Efficiency  Comparison Table

Asia Pacific

 
5/348 votes.